Exploring Toro Zero Turn Mowers: Features, Benefits, and Maintenance

The Toro zero-turn mowers are revolutionizing how homeowners and landscaping professionals approach their mowing jobs. Known for being precise, efficient, and user-friendly, these machines have become the top choice for maintaining immaculate lawns with the least amount of effort. In this article, we will go deep into the features that put Toro zero-turn mowers in a league of their own, the advantages they afford to their users, and easy maintenance tips to maintain them for a long time. So whether an expert lawn care enthusiast or the curious one on an entry-level zero-turn mower, this will help you see how Toro goes above and beyond mowing expectations.

Introduction to Toro Zero Turn Mowers

Toro zero-turn mowers are truly the most well-known ones for their agility, time efficiency, and fine professional results. Built for durability with ease of operation, these mowers provide precise control and smooth navigation around obstacles and are all around perfect for residential and commercial lawn care needs. With features such as heavy-duty cutting decks, adjustable settings, and powerful engines, Toro zero-turn mowers offer a smooth cut every time. From reliability to performance, they represent the best option for anyone seeking the very best in lawn mowing.

What is a Zero Turn Mower?

Zero-turn is one of the most efficient lawn maintenance machines, designed for high levels of maneuverability and speed. While traditional mowers have a single transmission, zero-turn mowers in a stunning display have two hydrostatic transmissions operator controls the movement of each rear wheel independently, allowing very precise 360-degree turns. This ability processes unusual great for landscaping around tight spaces, obstacles, or ironically extreme landscapes.

The zero-turn mowers boast of powerful engines, ranging from 19 to 27 horsepower, and its power proves its vitality in covering a large land quickly. Speeds somewhere near 7-13 miles per hour, depending on the model, were truly sufficient to enable homeowners and professionals to do the lawns in considerably less time than any other conventional lawn tractor. Cutting deck sizes customarily extend from 42 inches up to 72 inches, much the same as a good range from small-lawn areas up to really huge fields.

Apart from that, these mowers are actually designed for cutting purposes and precision. With adjustable cutting height options, they usually offer a range from 1.5 to 4.5 inches, which gives a user control over how long the grass would be left after cutting, hence the ability to have a customized finish. Some of these options even cater to features such as ergonomic seating, vibration dampening, and safety devices so that mowing would be comfortable and safe.

Known for diminishing mowing time, boosting efficiency, and producing clean cuts every time, zero-turn mowers are perfect for both commercial and residential use. For those who want to leave their yards looking professional without much trouble, these have become the most preferred option.

Why Choose Toro Zero Turn Mowers?

The manufacturing concept of Toro zero-turn mowers includes innovation with durability and technology. This mowers is designed for even the worst lawn-care tasks and therefore serves reliably with superior configurations that ensure good service.

An important aspect of Toro zero-turn mowers is the patent from the MyRIDE® Suspension System that guarantees ultimate operator comfort. It minimises shocks from rough terrains and provides smooth and stable operations even during extensive periods. Many Toro mowers carry high-capacity cutting decks, ranging from 42 inches to 72 inches, allowing greater areas to be covered in much less time- an important attribute for any large properties or commercial use.

Performance is all about heavy-duty engines, such as the Toro V-Twin and commercial Kawasaki engines, which produce greater horsepower and precise torque. Next is the more operational Smart Speed® Control System of Toro, where operators are free to choose from cutting speeds for mowing, towing or trimming to maximize efficiency on different terrains.

Another selling feature of a Toro zero-turn mower is durability. Their heavy-duty frame and reinforced deck are designed to withstand any such wear and tear and should provide genuine service for many years. With strong warranties backing up their claims, Toro keeps up their end of the bargain when committing to quality and customer satisfaction.

In the end, many users report up to 45% time savings over the normal mowers, giving Toro zero-turn mowers cost-saving advantages both from perspectives of homeowners and professionals. This production, comfort, and durability, in tandem, have made Toro one of the preferred names in lawn-care equipment.

Overview of Toro’s TimeCutter Series

The Toro TimeCutter Series is a range of high-performance zero-turn mowers intended for residential and light commercial users alike. Built for speed, durability, and precision, they marry Toro’s manufacturing know-how with ingenious ideas that improve the mower’s ease of use and efficiency.

The TimeCutter Series boasts the unique Smart Speed® Control System, granting the operator three different speed options depending on the activity. This mode offers flexibility to mow large areas rapidly, maneuver around obstacles, or tow attachments with smooth precision. Achieving a top speed of up to 7 MPH, the TimeCutter marries speed and accuracy in the art of lawn cutting.

With cutting decks from 42 to 60 inches, various property sizes are catered to. These decks, made of heavy-duty steel, are designed for durability and hold up well for consistent quality of cut. Additionally, through Toro’s patented Recycler® technology, the dispersion of grass clippings is enhanced, reducing the need to bag, thus promoting lawn health.

In terms of comfort and ergonomics, another priority. TimeCutter still sports a large seat with a high back, with anti-vibration floorboards for reducing fatigue through long hours of use. Along with the instinctive control panel, operators feel free and easy whilst performing their grass-cutting chores. Some models also provide a cupholder and storage spaces.

And then there is fuel efficiency. Most of the TimeCutter mowers offer a blend of mighty yet economical engines. For instance, Kawasaki and Toro V-Twin engines are chosen for their potential to give tablespoons of performance while minimizing fuel consumption, which in turn reduces its overall cost.

Finally, Toro backs up a solid warranty on the TimeCutter Series for that added assurance. Balancing speed, practicality, and strength, the TimeCutter Series opens the door to the finest mowing world for residential use and small business owners.

Key Features of Toro Zero Turn Mowers

• Exceptional Maneuverability: One of the features of zero-turn technology is that it can mow with precision and efficiency, thus able to cover much ground in very little time.
• Powerful Engines: They come fitted with reliable engines from reputable manufacturers, balancing their operation with fuel economy.
• Durable Construction: Made with heavy-duty materials for lasting reliability and resilience against different mowing conditions.
• Comfortable to Use: Equipped with features that allow padded seat options and simple controls to make operation comfortable over the long run.
• Cutting Options Customizable: Different cutting heights and a wider range of deck sizes to suit various types of yards and land conditions.
• Smart Speed Technology: It gives the user an option to select ground speeds for mowing, towing, or trimming.

When taken as a whole, these features make Toro Zero Turn Mowers the reasonable choice for professional-grade results with minimal effort.

Cutting Performance and Efficiency

Toro Zero Turn Mowers are specially crafted for premium-class performance and high-end efficiency, achieving any kind of lawn care in an effective and time-saving manner. When compiled with Ki-wasaki and Kohler engines, they offer relentless power to wrestle with challenging mowing situations. The dual-hydrostatic transmission confers smoothness to the operation and maneuverability, enabling it to glide smoothly around narrow spaces or weird landscapes.

The cutting systems in these mowers are very sophisticated, having precisely engineered blades for uniform and clean cutting. Toro’s patented Recycler Technology boosts this cutting power to chop the grass clippings very finely so that they can be brought back into the soil to act as an organic fertilizer, making stronger lawns. With up to 7 MPH cutting speed, they marry the velocity of a well-oiled machine with precision to slash mowing time- a much-needed factor for owners of huge properties.

Fuel than running efficiency is another feature to be considered, whereas, on the other hand, the model is technically designed for fuel economy while outputting power. The TimeCutter Series mowers by Toro, for instance, can mow a whopping 2.8 acres in an hour and are a perfect choice for whoever aims to get the best of efficiency without focusing on quality compromise. All that marks Toro Zero Turn Mowers as an apt consideration for anyone looking for high performance and green options for lawn maintenance.

Comfort and Ergonomics in Design

Toro Zero Turn Mowers feature the perfect design to maximize comfort and convenience, providing for easy mowing, even for longer periods. Numerous models provide adjustable high-back seats with armrests so that operators can position themselves for maximum support and least fatigue. Operators are protected from vibration thanks to the vibration-damping technologies, which entrain enhanced comfort by removing the strain physically in enduring operation.

Ergonomically positioned intuitive control levers enhance handling capability, requiring a minimal amount of force to deliver a more precise handling of the mower. Industry experts consider these designs paramount in reducing operator stress, with research showing ergonomic equipment not only increases satisfaction but boosts productivity by at least 20%. Toro also pays great attention to building smart storage solutions into the design, so there is easy access to a compartment for tools and all things personal, allowing the operator to stay focused on the job at hand. By focusing on comfort and usability, Toro sets the bar for mowers in regards to performance and physical user comfort.

Durability and Build Quality

Toro mowers are designed to meet the harshest conditions, which speak for Toro’s concern for robust durability and craftsmanship of the highest quality. Built for the longest life, Toro mowers feature heavy steel decks and materials resistant to corrosion so they can be promised for reliable performance season after season. Precision-engineered components are then stress-tested to meet industry standards, assuring the ability to take on the hardest work without sacrificing performance.

Features like high-strength axles and reinforced frame designs are just a few of the innovations incorporated in Toro gear to make it capable of handling tough terrain through countless hours. For example, commercial-grade engines provide additional durability to mower operation, lengthening times between lengthening wear and tear on operations. Such features make performance along with ease of maintenance further solidified and worth every value to the customer. By combining superior materials with state-of-the-art engineering, Toro has cemented its place as the producer of highly durable and resilient landscaping equipment.

Benefits of Using Toro Zero Turn Mowers

1. Exceptional Maneuverability – Toro Zero Turn Mowers are designed for precise and efficient movement so that users can easily mow around obstacles and achieve a cleaner, professional finish.
2. Saving Time-Efficient – Compared to traditional mowers, these machines have reduced mowing times, thus making the maintenance of large lawns or properties very quick and easy.
3. Comfortable Operation – Toro mowers are designed with ergonomic seating and controls that ensure user comfort during use, thereby making it easy to mow for longer hours without fatigue.
4. Durability and Reliability – Constructed with the best engineering and materials, Toro mowers are designed to withstand harsh use, thus guaranteeing long-term service.
5. Customizable Options – Toro has numerous models and options, including cutting deck sizes and engine options, to suit every landscaping requirement.

Toro, coupled with its great capabilities and easy-to-use features, is a brand that homeowners and experts alike can rely on.

Time-Saving Advantages

Toro Zero Turn Mowers are inherently designed for cutting-edge efficiency so as to reduce the time required for lawn maintenance. The zero-turn steering system ensures precise maneuverability, allowing users to make fast and tight turns while adequately covering the areas. Studies have established that zero-turn mowers cut down on mowing time by as much as 50%, as compared with traditional riding mowers, since they are faster and do not double-cut or miss patches. Also, Toro mowers allow higher speeds—many models ranging between 6 and 8 mph—which means that you can shave off even more time yet maintain the quality of the cut.

With features like rugged cutting decks and adjustable height settings, you can fine-tune your mowing experience in accordance with your lawn conditions, thereby catering to efficiency. These lawn mowers are equipped with ergonomic controls to ensure less fatigue while operating for a longer period, paving the way for faster lawn mowing for even more prominent properties. Such innovations make the Toro Zero Turn Mower a perfect time-saving solution for landscapes both residential and commercial.

Improved Maneuverability for Lawn Care

I have always considered Toro Zero Turn Mowers to offer excellent maneuvering capabilities for lawn care. The zero-turn features give exact control with tight turning radii to be mowed around obstacles like trees, flower beds, and fences with relative ease. The level of maneuverability saves time in mowing form and energizes making a fine hand in less time.

Enhanced Yard Aesthetics

Modern equipment for garden maintenance consists of plenty of options that create too many choices for customers and keep the latter confused. According to industry statistics, almost 79 percent of homeowners rate their lawn among the most important highlights of the home’s exterior view affecting curb appeal. Specially designed Toro Zero Turn Mowers, with their precision-engineered decks and adjustable cutting heights, provide a perfect cut that enhances the look of the lawns. At least studies support that finely mowed lawns retain higher rates of growth and rich color, maximizing the visual appeal of the outdoor landscapes. Also, bagging can come into play when mulching. It frees up the floor and negates the need to rake clippings, which means a well-manicured yard.

Maintenance Tips for Toro Zero Turn Mowers

Maintenance tips for Toro zero-turn mowers include regular oil changes, blade sharpening, filter replacements, and following the operator’s manual.

Task	Details
Oil Change	Regularly replace oil
Blade Care	Sharpen or replace blades
Air Filter	Clean or replace filter
Fuel Filter	Replace as needed
Spark Plugs	Inspect and replace
Manual	Follow operator’s guide

Regular Maintenance Checklist

To ensure optimal performance and longevity of your Toro Zero Turn Mower, it’s crucial to adhere to a regular maintenance schedule. Below are detailed steps and recommendations to keep your mower in excellent condition:

1. Check and Change Engine Oil Regularly

• • Inspect the engine oil level before each use. Low oil levels can lead to engine overheating or damage.
  • Change the engine oil after the first 5-8 hours of use for a new mower and then every 50 hours of operation under normal conditions. For heavy usage, oil changes may be required more frequently.
  • Use the manufacturer-recommended oil grade for best results, such as SAE 30 for temperatures above 40°F or SAE 10W-30 for variable temperatures.

2. Replace or Clean Air Filters

• • A clogged air filter can reduce engine efficiency and impair performance. Check the filter every 25 hours of usage or more frequently in dusty environments.
  • Replace paper air filters annually or sooner if visibly dirty. Foam pre-cleaners should be washed with soapy water, dried, and oiled according to the manual.

3. Sharpen Mower Blades

• • Dull blades tear grass unevenly, leading to a patchy, unhealthy lawn appearance. Inspect the blades every 8-10 hours of use or before each mowing session for nicks and wear.
  • Sharpen blades when they become blunt and replace them if cracks or excessive wear are evident. Properly balanced blades reduce vibration and collect clippings more efficiently.

4. Check Tires and Tire Pressure

• • Uneven or low tire pressure can affect the mower’s stability and cutting height, resulting in an uneven lawn.
  • Inspect tires weekly for wear, punctures, and ensure tire pressure meets the recommended PSI as stated in the owner’s manual.

5. Inspect and Tighten Belts

• • The drive and deck belts play a critical role in mower operation. Examine belts for cracks, wear, or stretching every 10-15 hours of use.
  • Replace any damaged belts promptly to avoid issues with blade rotation or drive functionality.

6. Battery Maintenance

• • A healthy battery ensures your mower starts smoothly. Check for corrosion on terminals and clean with a mixture of baking soda and water if buildup is present.
  • Ensure the battery is adequately charged, especially during off-season storage. Disconnect the battery if the mower won’t be used for extended periods.

7. Clean the Underside of the Mower Deck

• • Grass clippings, dirt, and debris can accumulate beneath the mower deck, leading to reduced airflow and cutting performance.
  • Clean the deck after every use to prevent buildup. Use a garden hose or scraper tool to remove debris, ensuring the mower is turned off and the spark plug is disconnected for safety.

8. Replace Fuel as Needed

• • Avoid using stale fuel as it can cause engine issues. Use fresh fuel or add a stabilizer if the mower will not be used for over 30 days.
  • Regularly inspect the fuel filter and replace it annually or at signs of clogging.

9. Lubricate Moving Parts

• • Proper lubrication reduces friction and extends the life of moving parts. Grease the wheel bearings, pivot points, and other recommended areas every 25 hours of operation or more frequently under rugged conditions.

10. Perform Annual Professional Tune-Up

• • Once a year, schedule a professional tune-up to address any underlying issues and ensure the mower performs at its best. This typically involves spark plug replacement, complete inspection, and other adjustments.

By following these comprehensive maintenance steps, you can maximize the performance and lifespan of your Toro Zero Turn Mower while maintaining a flawless yard.

Common Issues and Troubleshooting

Even with proper maintenance, Toro Zero Turn Mowers may encounter occasional issues. Understanding these common problems and knowing how to address them can save time and ensure your mower operates efficiently. Below is a guide to frequent issues and troubleshooting steps:

1. Engine Won’t Start

• • Possible Causes: Check for an empty fuel tank, old or stale fuel, clogged fuel filters, or a faulty spark plug. Additionally, ensure the battery is fully charged if using an electric start system.
  • Troubleshooting Tips: Refill with fresh, clean fuel if needed, and inspect or replace the fuel filter and spark plug. For battery-operated systems, test the battery and replace it if it’s not holding a charge.

2. Uneven Cutting

• • Possible Causes: Uneven cutting may be caused by dull blades, improper deck leveling, or debris clogging the deck.
  • Troubleshooting Tips: Sharpen or replace the blades, and adjust the mower deck to ensure even height on both sides. Clear any debris from the deck to improve airflow and cutting performance.

3. Mower Losing Power During Operation

• • Possible Causes: This issue could stem from dirty air filters, clogged fuel lines, or insufficient engine lubrication.
  • Troubleshooting Tips: Clean or replace the air filter, inspect fuel lines for blockages, and verify that the engine oil level meets the manufacturer’s recommendation. Regular oil changes can prevent this problem in the future.

4. Blades Fail to Engage

• • Possible Causes: A damaged PTO (Power Take-Off) clutch, loose belt, or faulty switch could prevent the blades from engaging properly.
  • Troubleshooting Tips: Inspect the PTO clutch for damage and replace if necessary. Tighten or replace the belt and ensure the switch controlling blade engagement is functioning correctly.

5. Vibrations or Excessive Noise

• • Possible Causes: Vibrations are often caused by unbalanced or damaged blades, loose engine or deck components, or debris stuck in the mower.
  • Troubleshooting Tips: Check the blades for cracks or bends and replace them as needed. Tighten any loose bolts on the engine or deck, and remove debris obstructing moving parts.

6. Overheating Issues

• • Possible Causes: Overheating can be due to insufficient air circulation, a clogged cooling system, or low engine oil levels.
  • Troubleshooting Tips: Clear any obstructions around the air intake and cooling system. Replace the air filter if dirty, and ensure the oil is at the correct level. Regularly cleaning these parts can prevent overheating.

By familiarizing yourself with these common issues and their solutions, you can address problems quickly and maintain uninterrupted performance. Consistent preventive measures, such as cleaning and inspecting your mower, are key to reducing the risk of significant malfunctions. Always refer to the operator’s manual for detailed instructions tailored to your specific model.

Battery Care and Management

I follow a few key practices in battery care and management to ensure longevity and performance. First, I run a visual check on the battery terminals for corrosion, cleaning them as needed. I then make sure the battery is fully charged, especially if the equipment is set to be stored for a long time. I also use only the proper charger that matches the battery specifications to avoid overcharging, as overcharging will deteriorate the battery. By doing this, I have maintained reliable battery performance and the prevention of unpleasant surprises.

Comparing Toro Zero Turn Mowers with Competitors

Toro zero-turn mowers are often compared with competitors like Hustler, Ferris, John Deere, and Bad Boy for their performance, features, and value.

Brand	Cut	Speed	Comfort	Price	Durability
Toro	High	Fast	Excellent	Moderate	Reliable
Hustler	Smooth	Moderate	Good	Moderate	Durable
Ferris	Precise	Moderate	Superior	High	Long-lasting
John Deere	Even	Moderate	Good	High	Sturdy
Bad Boy	Good	Fast	Decent	Affordable	Tough

Performance Comparison with Other Brands

Toro stands at the eminent position of innovations, performance, and reliability when it comes to zero-turn mowers. The zero-turn models from Toro are built around high-precision cutting decks with engines that are at least efficient, if not the most efficient. Simple controls are also included with the machines to make the mowers stronger competitors.

Toro zero-turn mowers have been renowned for durability and cutting technology in comparison with Husqvarna and Cub Cadet. For example, the MyRIDE® Suspension System, patented by Toro, brings comfort unparalleled over rough terrains, while the Husqvarna Z254 mostly considers engine power, being fitted with Kohler or even Kawasaki engines. Toro, on the other hand, focuses both on power and comfort, most often utilizing heavy-duty Kawasaki and their own engines quite well in tandem.

By cutting width, Toro typically offers great flexibility, with sizes ranging from 42 to 60, thereby satisfying both residential and commercial needs. Cub Cadet, accordingly, serves a smaller niche market and mostly leans towards entry-level machines meant for smaller yards. Toro considers features such as Smart Speed® Control, which allows the user to vary cutting or traveling speed depending on their task capability that most competing brands do not offer.

Repairs, along with fuel economy advantages, come from Advanced Engines that maximize power output while minimizing emissions provided in many Toro models. This can be seen best in commercial-grade the Toro Z Master 2000 series, which focuses on the reduction of downtime and maximized productivity and stands toe to toe with John Deere’s ZTrak models.

All in all, Toro offers a synthesis of technology, ergonomic design, and durability, making it the choice for both homeowners and landscape contractors. With continuous updates and innovations, it enjoys a leadership role within the industry as regards the zero-turn mowers.

Pricing and Warranty Insights

Trim prices range from modest to downright stylish for several budgets and mowing needs. Toro zero-turn mowers for homeowners start at about the $3,000 range, with entry-level models such as the TimeCutter series providing great value for smaller or midsize yards. Higher-end professional-grade models range on the Toro Z Master lineup from $7,000 to $12,000, dependent on features and deck configurations-aimed at commercial landscapers who seek durability and performance.

The warranty coverage also matches up with Toro’s competitive pricing. Most residential models have unlimited hours of residential warranty coverage for three years, allowing for peace of mind for homeowners. Commercial Z Master series models are generally covered by a 5-year warranty for 1,200 hours of use. These warranties show that Toro is confident of the equipment’s reliability and longevity but want the consumer to know they are well-covered in case of manufacturer shortcomings, whether regular or occasional use.

User Reviews: What Customers are Saying

The equipment from Toro is praised by many customers for its features like durability, performance, and user-friendly design. Homeowners highlight particular features such as web design and ease of maneuvering across uneven terrains or in tight spots. The Z Master mowers have been praised by users for power being mounted to precision, placing them as a worthy consideration for both residential and commercial needs.

In recent times, customer ratings are at an average of 4.6 across most platforms, presenting a high customer satisfaction. Toro mowers are described as highly reliable by 87% of the users reviewing the product, pointing out that their experience with Toro mowers has been much less maintenance-intensive, compared to other brands. Warranty package-wise, the 5-year commercial warranty has been pointed out as a notable feature which allures customers, offering assurance and longevity in their investment value.

Some customers have occasionally pointed to the higher initial price, but these are rarely seen as disadvantages when one weighs the reward of the cost in repair and replacements over a period of time. Overall, customer feedback has made it clear that Toro is a reliable, respectable, and high-grade brand of mowers that offer very high performance and value for money.

Reference Sources

1. Toro Z-Turn Riding Mower – Environment, Health and Safety (University of North Carolina): This document provides safety guidelines and operational instructions for Toro zero-turn mowers.

2. HAZARD ALERT – Toro Zero Turn Operator Safety Training (University of Kentucky): Offers safety training and operational tips for zero-turn mowers, including Toro models.

3. Retrofit Kit for Automated Zero-Turn Lawn Mower (Northern Illinois University): Discusses innovations in zero-turn mowers, including automation and user-guided systems.

Frequently Asked Questions (FAQs)

What is the warranty on Toro zero-turn mowers?

Toro zero-turn mowers typically come with a 3-year limited warranty, covering defects in materials and workmanship. For residential customers, the coverage includes parts and labor, while commercial users may have different terms. Always refer to the specific warranty manual for details regarding your model.

How do I maintain my Toro zero-turn mower?

Maintaining your Toro zero-turn mower involves regular tasks such as checking and changing the oil, cleaning or replacing the air filter, sharpening the blades, and inspecting the battery. Following the maintenance manual can help ensure your mower is built to last and operates efficiently.

What are the benefits of a zero-turn lawn mower?

Zero-turn lawn mowers offer superior maneuverability, allowing users to navigate around obstacles with ease. Their design provides a tighter turning radius, making them ideal for residential yards and commercial landscaping. They also tend to have larger cutting decks, like 48 or 54 inches, which can reduce mowing time.

How does the MyRide operator platform work in Toro mowers?

The MyRide operator platform in Toro riding lawn mowers features a suspended seat system that absorbs bumps and vibrations, providing a smoother ride. This innovative design enhances comfort during long mowing sessions, ensuring the operator can focus on the task without fatigue.

Where can I find a Toro dealer for parts and kits?

You can locate a Toro dealer by visiting the official Toro website and using their dealer locator tool. Dealers can provide parts, accessories, and kits to enhance your zero-turn mower’s capabilities and performance.

What is the cutting width of a Toro riding lawn mower?

The cutting width of Toro riding lawn mowers varies by model, with options typically ranging from 30 inches to 60 inches. The wider the cutting deck, the more grass you can cut in a single pass, making it easier to maintain larger yards.

Can I use a battery-powered Toro mower for my yard?

Yes, Toro offers battery-powered mowers that provide the convenience of cordless operation. These models are particularly beneficial for smaller yards, offering quiet and emission-free mowing without the need for gasoline or oil changes.

How do I operate a zero-turn mower effectively?

Operating a zero-turn mower effectively requires understanding its controls. The independent wheel control allows you to steer by moving the levers. Practice in an open area to learn how to maneuver around obstacles and achieve an even cut in your lawn.

What makes Toro mowers built to last?

Toro mowers are designed with durability in mind, featuring high-quality materials and robust construction. Their engines are built for performance, while the cutting decks are engineered for longevity, ensuring that your investment remains reliable over time.